|
I am using a standard twill pattern for this project as the angora yarn will provide sufficient texture and interest. The scarves can be woven in the twill treadling as shown in the draft or in tabby ( 1-3, 2-4)
Weft:
Handspun singles angora yarn
If angora is not available, try using mohair or another soft fine yarn such as merino wool or alpaca.
Weave in twill for a length of 60 inches and leave a space of 12 inches for fringe (6 inches per scarft), before starting the next one.
Finishing:
Cut between each scarf length and twist or braid the ends prior to washing. Wash the scarves in hot, soapy water. Rinse in cool water. The angora fiber will full and fluff out with this treatment.
 I generally do not dye angora prior to spinning as I find that the angora matts quite easily and then is much more difficult to handle. As these scarves are small, they will be fairly easy to dye even as a finished project. After washing, I place the scarf in the hot dye solution and let it simmer for about 20 minutes. This method of dyeing will not give an even colour because the fiber absorbs the dye at different rates at different temperatures. The dye solution in the bottom of the pot is hotter than that at the top of the pot. My rabbits are also multi-coloured so when dyeing the wool, a lovely variegated colour will result.
|